Deployment failed on device due to snort failed to restart
Upgraded my HA pair of FTD 2110s to 6.2.3 a couple weeks ago. Yesterday I started seeing FW01 as primary-failed and FW02 as secondary-active. Turns out the primary failed due to snort failing to restart. Rebooted FW01 and still the same issue. Cisco TAC suggested to break the HA pair and then try reboots to see if that fixes the issue. No such luck.
Also, a hotfix for 188.8.131.52-10 was released 2 days ago which I applied and now both FW01 and FW02 are failing deployments due to snort.
Anyone else having the issues or know a quick fix?
Threat Response Basics
What is Threat Response and how can it help my organization?
What is the cost of Threat Response?
What are the deployment options for Threat Response?
Is Threat Response available outside of the United States?
Gartner has once again named Cisco a Leader in the Magic Quadrant for Network Firewalls. This distinction recognizes Cisco's ingenuity in redefining the firewall as the basis for an integrated security platform.
Find out how Cisco stands out from the comp...
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...