02-23-2011 12:25 AM - edited 03-11-2019 12:55 PM
Hi Guys,
I havea number of contexts on my ASA5520's runing OS 8.3. I've created a capture in the admin coontext that I'd like to download to view in wireshark.
Previously I've done this using the copy /pcap capture: command on ASAs in signle context mode but this command is not avaialble to me in my admin context.
I the fucntionality still availble and if so, can anyone point me in the diretion of some instruction?
TIA
Rgds
Scott
Solved! Go to Solution.
02-23-2011 12:43 AM
Please refer to this document: https://supportforums.cisco.com/docs/DOC-1222#Gather_captures
Hope this helps. Please reply if you need further assistance.
Regards,
Chirag
P.S.: Please mark this thread as answered if you feel your query is answered. Do.rate helpful posts.
02-23-2011 12:37 AM
Hi Scott,
Here is the command:
https://fwsm-ip-address/capture/context_name/captest
Here is a document for your reference:
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080a9edd6.shtml
Hope this helps. Please reply if you need further assistance.
Regards,
Chirag
P.S.: Please mark this thread as answered if you feel your query is answered. Do.rate helpful posts.
02-23-2011 12:43 AM
Please refer to this document: https://supportforums.cisco.com/docs/DOC-1222#Gather_captures
Hope this helps. Please reply if you need further assistance.
Regards,
Chirag
P.S.: Please mark this thread as answered if you feel your query is answered. Do.rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide