Firepower 9300 asdm issue

[andmo5]

Hello,

Does anyone know if the ASDM is handeled differently/automatically when deploying an ASA image onto a available Security Module on a Cisco 9300 chassi?

The only ASDM file that is showing locally (dir) is "asdm.bin" without any version number in the filename, is that because the ASDM version is "locked" to the selected ASA image for 9300 (9.8.4)

We installed; 

Cisco Adaptive Security Appliance CSP package for the Cisco Firepower Series.

cisco-asa.9.8.4.SPA.csp

[andmo5 · Accepted solution]

Found this on cisco.com, guess the answer is clear :)

"When you upgrade the ASA bundle in FXOS, the ASDM image in the bundle replaces the previous ASDM bundle image on the ASA because they have the same name (asdm.bin). But if you manually chose a different ASDM image that you uploaded (for example, asdm-782.bin), then you continue to use that image even after a bundle upgrade. To make sure that you are running a compatible version of ASDM, you should either upgrade ASDM before you upgrade the bundle, or you should reconfigure the ASA to use the bundled ASDM image (asdm.bin) just before upgrading the ASA bundle."