cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


141
Views
0
Helpful
2
Replies

FMC Deployment Time

Hi Team,

 

In FMC, we are facing an issue with the Deployment Time. Even for a small change (Add a port in a allowed rule, Adding a Static Route) it is taking minimum 5 min. And it can go till 9 to 10 min. Running on the Latest version which is 6.2.3.2.

 

Any Solution for this behavior.

 

Thank you,

Vishnu

 

2 REPLIES 2
Highlighted
Frequent Contributor

Re: FMC Deployment Time

I would recommend to light up a cigar :).

All jokes aside, except checking your FMC server resource usage while deploying there's little you can do. I just added extra vCPUs to my server after some careful resource monitoring.
As for memory getting from 8 to 12 GB proved of no use.

Re: FMC Deployment Time

I even raised this Concern with Cisco and as per TAC this is the Default behavior and as is now there is no workaround or solution for this,

 

May be there will be a Enhancement in the Future release. 

 

Thank you,

Vishnu