cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


74
Views
0
Helpful
0
Replies
Highlighted

FW MODULE 6500 NO FUCTION

CORE-UBV-01#show module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1   48  48 port 10/100/1000 IEEE 802.3AT       WS-X6148E-GE-45AT  SAL1644RDQF
  2   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL1642QGQJ
  3    6  Firewall Module                        WS-SVC-FWM-1       SAL1628GQJ9
  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B       SAL1642QK0A

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  e4d3.f1cb.5070 to e4d3.f1cb.509f   1.3   8.4(1)       12.2(33)SXJ1 Ok
  2  30f7.0d04.90a4 to 30f7.0d04.90d3   2.4   12.2(18r)S1  12.2(33)SXJ1 Ok
  3  f0f7.5568.b788 to f0f7.5568.b78f   4.5   7.2(1)       20.1(2)SXJ   PwrDown
  5  ccef.4838.53c2 to ccef.4838.53c5   5.13  8.5(4)       12.2(33)SXJ1 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
  1  IEEE 802.3at PoE+ Daughter  WS-F6K-48-AT       SAL1644RFZ0  1.0    Ok
  2  Centralized Forwarding Card WS-F6700-CFC       SAL1642QGUW  4.1    Ok
  5  Policy Feature Card 3       WS-F6K-PFC3B       SAL1643QMLG  2.6    Ok
  5  MSFC3 Daughterboard         WS-SUP720          SAL1642QHXZ  5.1    Ok

Mod  Online Diag Status
---- -------------------
  1  Pass
  2  Pass
  3  Not Applicable
  5  Pass

CORE-UBV-01#HW-module MOdule 3 RESET
Proceed with reload of module?[confirm]
% module 3 is operationally off (Module  Failed SCP dnld)

CORE-UBV-01#

 

I have a problema with my integrated FW of my 6500.

I restarted the 6500 but nothings happens.

Any output would be greatly appreciated.

 

 

Everyone's tags (1)