09-28-2011 03:50 AM - edited 03-11-2019 02:31 PM
Hi All,
I am trying to implement a packet capture of the type "asp-drop" on a FWSM context but for some reason the FWSM is not accepting it.
Below I have mentioned the command I am trying the error the FWSM is throwing at me.
CUSTOMER-F1# capture TEST type asp-drop all
ERROR: Another capture associated with this drop.
I have no other packet captures configured on my FWSM context
CUSTOMER-F1# sh capture
CUSTOMER-F1#
Any ideas please?
Regards,
Nilesh
09-30-2011 07:15 AM
Hi Nilesh,
I would suggest opening a TAC case to have this investigated.
-Mike
09-30-2011 09:48 AM
You are trying that in priv exec---you need to be in global config. Also, don't forget logging (deb at buffer/syslog server) and debugging (if applicable), as well as an acl. You can also
FWSM#clear capture
or
clear capture TEST
09-30-2011 09:51 AM
Oh yeah...
FWSM#clear asp-drop
then try your capture in global config
or you can also do a sh asp-drop
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide