Hi,
I have erased the Cisco image from my PIX 515E, and while i tried to load a new image its asking for activation key. I tried its old key. but no use. Please help me on this.
PIX-515E# sh vers
Cisco PIX Firewall Version 6.3(1)
Cisco PIX Device Manager Version 3.0(1)
Compiled on Wed 19-Mar-03 11:49 by morlee
PIX-515-E up 37 mins 21 secs
Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 000e.846c.9598, irq 10
1: ethernet1: address is 000e.846c.9599, irq 11
2: ethernet2: address is 0002.b3e7.6d17, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Enabled
Maximum Interfaces: 3
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
This PIX has a Restricted (R) license.
Serial Number: 807500649 (0x30217b69)
Running Activation Key: 0xcc74f498 0xe024acd8 0xd4d1703b 0xc31a4602
Configuration last modified by enable_15 at 12:44:12.813 UTC Thu Apr 19 2012
Thanks in advance,
Shiva S
