How to Configure Multiple Static IP's on Cisco ASA 5505

[Vikrant Ambhore]

Hello All,

I am setting up a Cisco ASA 5505 first time for My organisation, I usually setup Cisco Router, I have 10 Static IP, & Have 6 Server (S-1, S-2, S-3, S-4, S-5, S-6), Traffic Should be pass through the ASA and is distributed to the destination server that is specified in the packet. LAN servers can be separated into discrete networks for security. For example, a private LAN for internal traffic accessed only via remote dial-in VPN sessions and Want to Configure DMZ for Server (S-4, S-5, S-6) that allows public web traffic.

I have Attached My Network Diagram please look on this

I have some question,

1:- Can we Configure Multiple Static IP On ASA 5505 ?

2:- If Diagram is wrong so please suggest what change need to be done ?

3:- Can some body help Me step by step Guidence ?

Vikrant

[paolo bevilacqua]

Maybe ask this on Security forum where the ASA pertains as product ?

[Jitendriya Athavale]

refer to the below links and let me know if this helps, this will give you some direction

for setting up remote vpn clients

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/vpnrmote.html

this gives you some idea on how to set up asa for server access for users on internet

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094ea2.shtml

apart from tht here is a config guide in general

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/fwmode.html

try using asdm if you are using newer versions of code, it is good for some one who is still learning to configure asa

let me know if you are stuff somewhr