cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
457
Views
0
Helpful
1
Replies

how to connect to other clients on remote VPN (ASA)

mohitvicky
Level 1
Level 1

I have a cisco ASA 5510 device. I have confiured remote access VPN on it.

It works fine, i can connect to hosts on INSIDE as well as DMZ, but i cannot connect to other clients that are connected to same VPN.

For example i have to clients connected to VPN clientA and clientB with vpn pool IP addresses 10.40.170.160 and 10.40.170.161 respectively.

these both devices are not able to connect each other.

Any suggestions.

Thanks in advance.

1 Reply 1

mohitvicky
Level 1
Level 1

solved, thanks to Jouni

configured following:

access-list VPN-CLIENT-NAT0 remark NAT0 for traffic between VPN Clients

access-list VPN-CLIENT-NAT0 permit ip 10.40.170.0 255.255.255.0 10.40.170.0 255.255.255.0

nat (outside) 0 access-list VPN-CLIENT-NAT0

you can see detailed discussion here :

https://supportforums.cisco.com/message/4154856#4154856

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: