Trying to do unidirectional NAT on certain server from outside, different unidirectional NAT when server goes outbound. I found for 8.3 and later. I will appreciate if you have any information on this.
I think you are referring to twice NAT on the ASA:
Please rate helpful posts and mark correct answers.
No I am referring to unidirectional source NAT.
1) 10.10.10.1 (client) -> 192.168.1.1 (server)
10.10.10.1 NAT to 172.16.1.1 Outside Zone to Inside Zone
2) 192,168.1.1 (server )-> any destination
192.168.1.1 NAT to 172.16.5.1 Inside Zone to Outside Zone
*IPs are just for examples.