cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


250
Views
15
Helpful
5
Replies
Enthusiast

How to push Cisco Anyconnect Posture module

Hi Folks,

Can somebody guide me how to push Cisco anyconnect posture module via ASA when a user connects anyconnect vpn. I am planing to do VPN posturing with ISE 2.2

 

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: How to push Cisco Anyconnect Posture module

>From ASA CLI, you can select which modules to run under webvpn configuration

Step 1

In ASDM go to Configuration > Remote Access VPN > Network (Client)
Access > Group
Policies.
Step 2

Select a group policy and click Edit or Add a new group policy.
Step 3

In the navigation pane, select VPN Policy > AnyConnect Client. At Client
Modules to Download, clickAdd and choose each module you want to add to
this group policy. The modules that are available are the ones you added or
uploaded to the ASA.
Step 4

Click Apply and save your changes to the group policy.
5 REPLIES 5
Rising star

Re: How to push Cisco Anyconnect Posture module

VIP Advisor

Re: How to push Cisco Anyconnect Posture module

>From ASA CLI, you can select which modules to run under webvpn configuration

Step 1

In ASDM go to Configuration > Remote Access VPN > Network (Client)
Access > Group
Policies.
Step 2

Select a group policy and click Edit or Add a new group policy.
Step 3

In the navigation pane, select VPN Policy > AnyConnect Client. At Client
Modules to Download, clickAdd and choose each module you want to add to
this group policy. The modules that are available are the ones you added or
uploaded to the ASA.
Step 4

Click Apply and save your changes to the group policy.
Enthusiast

Re: How to push Cisco Anyconnect Posture module

Thanks bro, It works.

-Abheesh
Highlighted
Hall of Fame Master

Re: How to push Cisco Anyconnect Posture module

You may want to consider pushing your module and associated settings from ISE vs. from ASA. That makes keeping things in sync easier.

Enthusiast

Re: How to push Cisco Anyconnect Posture module

Hi Marvin,
I am looking for automated process of posture module installation. From ISE we can achieve this by redirecting user to a client provision page and from there user need to click for installation.
In my case customer need without any user intervention we need to deploy posture module for VPN users.
Anyway thanks for your info.

-Abheesh