inspection protocol on ASA 5510

[Alaa.Jararha]

dears

i have a aproblem with connection between ASA 5510 and WASS , after i am check another ASA 5520 that Support inspect WASS ,

but i want to allow inspect WASS on ASA 5510 , so how can i solve this issue plz

Regards

Alaa Jararha

[Kureli Sankar]

I am not sure if I understand the question.

You have a 5520 where a waas issue was solved by enabled inspect waas and you'd like to do the same thing with the 5510?

Just enable inspect waas on the 5510.  You are unable to do that?

Make sure you are running 7.2.1 or above in the ASA which is when the command was introduced.

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/i2.html#wp1723612

-KS

[Alaa.Jararha]

Dears ,

I would like to thank you for you're response but as you know we can't

enable inspect wass on ASA5510

I have 8.0 is running but I don't have inspect wass , so do you have another

soluation plz

Thank youuuuuuuuuuuuuu

alaa jararha

[stuart]

Alaa,

You keep referring to 'wass' is this a typo?

Are you referring to WAAS - Wide Area Application Services?

Your correct by what you have typed WASS is not supported and to be honest I have no idea what you are referring to if this is the case.

The ouput I had previously posted was from an ASA5510 so it is definitely supported.

Im not aware of any licensing restrictions for this either.

Stu

[stuart]

You config should look something like the following:

policy-map global_policy
class inspection_default

  inspect waas

Is this how you are trying to apply it?

Stu

[stuart]

Alaa,

I'm not sure what your trying but WAAS inspection is supported on the ASA5510 as of v7.2(1).

ASA(config-pmap-c)# inspect ?

mpf-policy-map-class mode commands/options:

  ctiqbe          

  dcerpc          

  dns             

  esmtp           

  ftp             

  h323            

  http            

  icmp            

  ils             

  im              

  ipsec-pass-thru 

  mgcp            

  mmp             

  netbios         

  pptp            

  rsh             

  rtsp            

  sip             

  skinny          

  snmp            

  sqlnet          

  sunrpc          

  tftp            

  waas            

  xdmcp           

What version of code are you running?

I have checked through the docs also and see no restrictions on platform for WAAS.

Stu