I am trying to make the Multicast working between two vlans defined in FWSM..
Hosts are running mysql cluster and Multicast is used to send master/slave status
information to the IP 188.8.131.52 on port 45566.
The vlan is defined in FWSM and the host are connected via the core-switch(6513).
(hosts-->core-sws--->fwsm).. FWSM is running code 3.1(4).
I have enabled in FWSM. Just wondering if this is enough
to make it working ?
Any advice is higly appreciated.
Thanks in Advance. kris
Enabling multicast routing will enable pim on the FWSM interfaces so need to explicitly configure PIM. But you will need to configure an RP (Rendevous Point) for each multicast group. See attached for details -
This is to address those customers coming to ISE from ACS or new to ISE that need a password change portal (UCP)
What are the licensing requirements for this solution?
My Devices - For using the password change with My Devices you need plus licenses as ...
In this paper we will document the configuration and operation of an integrated solution that includes identity management, firewall, cloud-based management, and cloud-based logging.
We will use the following Cisco products:
These days everything is in the cloud. We all know that Cisco Firepower Threat Defense (FTD) is a unified software image, which includes the Cisco ASA features and FirePOWER Services. Using Cisco Defense Orchestrator (CDO), you can manage physical or virt...
Cisco Defense Orchestrator (CDO) is a cloud-based, multi-device manager that provides a simple, consistent, and highly secure way of managing security policies on all your ASA devices. CDO helps you optimize your ASA environment by identifying problems wi...
Join us on Tuesday, December 10 at 10 am PT and on demand after to meet the CEO and Founder of Cisco’s most recent security investment. In today’s cybersecurity arms race, how does Cisco stay one step ahead in the battle against attackers? One k...