cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
752
Views
0
Helpful
5
Replies

Migration from cisco 1721 to 1841

edgar-quintana
Level 1
Level 1

Hi,

I've migrated from cisco 1721 to 1841.

This router has 2 adsl wics(1wic 1hwic) and one lan interface with 2 lan addess configured. Behind the router is a firewall.

See the attached file.

This firewall enables a tunnel, because of this there is no vpn config into the router.

This config ran fine into with 1721 but this 1841 has the latest IOS which has a new ios firewall. I think there is a problem with the rules.

Remote ips are:

access-list 117 permit ip host 217.204.95.134 any

access-list 117 permit ip host 82.110.62.66 any

access-list 117 permit ip host 217.204.95.135 any

And the outside interface:

interface ATM0/1/0.1 point-to-point

Best regards

5 Replies 5

ktwaddell
Level 1
Level 1

Hi

Could you draw us a layout of the network, also you've attached the config and not the log, so could you add what error messages you're getting and detail what issues you are having please?

Cheers

Kev

Hi,

The router has 2 wic interfaces...with this scenario only the second one.

Scenario->

Wic->router->watchdog firewall(enabled a 3des vpn).

This firewall has an ip address like 10.168.157.x.

The problem is... is impossible to stablish this vpn, no connection from remote sites 217.x.x.x to this firewall.

Hi

still waiting for the sh log attachedment to see if the logs show why it isn't working.

Kev

Hi,

Do not worry!!!

I switched to my old 1721 until the problem will be resolved.

This friday afternoon I'll connect again my 1841 and data will be posted ok?

Best regards

Hi,

I connected the router this afternoon.

See the file attached

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card