03-21-2019 08:11 PM
Hi,
I have a layer 3 switch (Cisco Catalyst 3560) with multiple vlans configured on it, and connect to switch is inside interface of ASA 5505. Only host in the same vlan with inside interface of firewall can ping it, but I need all vlans can.
How would I config this?
03-21-2019 09:05 PM
03-21-2019 09:30 PM
All my vlans can communicate with each others.
My goal is make all vlans can go through firewall.
But inside interface of firewall can access only one vlan.
Do you have any idea?
03-24-2019 08:41 PM
05-24-2022 05:12 PM
Same problem here
I'd like to keep the VLANs on the Layer 3 switch within my Inside network
just dont know how to make the ASA5505 to route all of them to the internet
my VLANs live happely togather well connected with one another, all hosts are pinging
each other easely, but no connection with the edge router, or the ASA's outside network. I'm a student, and this is killing me. Please, any advize will be very appreciated. Thank you
05-24-2022 06:35 PM - edited 05-24-2022 06:35 PM
Have you tried creating a static route on your ASA? Try creating this maybe this can help. just let me know
route INSIDE 192.168.0.0(your inside network subnet) 255.255.0.0(subnetmask) 192.168.1.1(your Layer3 gateway ip) 1
05-25-2022 04:14 AM
Thank Herald,
it is a great idea.
The only problem I have now is, how to implement it,
i'm a student and not very experienced one,
that is why I learn from examples, and not so good with the idea on its own.
If you can demonstrate with example how and in which device to nest the commands,
it will be splendid.
Many Thanks
George
05-25-2022 07:05 PM
are you using FMC? ASDM? FDM or pure CLI? let me know so i can show you.
05-27-2022 04:03 AM
no special GUI
just Packet Tracer's user interface simulation
I use P/T for all my work, no real equipment involved
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide