NAT from outside to inside

[arshad_cisco86]

Hi ,

kindly suggest the configuration URL for natting from outside to inside interface .

Regards

Arshad Ayub

[Akira Muranaka]

Hello,

I think this document will help you. See "ASA Version 8.3 and Later" setting if you use ASA 8.3+ version.

NAT and PAT Statement Use on the Cisco Secure ASA Firewall Configuration Example
http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/15243-19.html#anc4

[arshad_cisco86]

Hi Akira , Thanks for this ..

But i need dynamic NAT for outside to inside ...(CCIE TOPIC)

Regards

Arshad Ayub

[Akshay Rastogi]

Hi Arshad,

You could configure Outside nat. Use the link below :

http://www.cisco.com/c/en/us/td/docs/security/asa/asa82/configuration/guide/config/nat_dynamic.html#wp1079227

Outside nat is configured by using 'outside' keyword at the end ot nat statement. Use the above link and search for ' Outside NAT and Inside NAT Combined'.

Hope it helps.

Regards,

Akshay Rastogi

Remember to mark the answer as correct if it answers your queries or rate the helpful posts.

[arshad_cisco86]

Hi Akshay ,

above link is very usefull for me .....

I got some configuration retaled to this, your suggstion is also very perfect for me .

Thanks  you very much

Regards

Arshad Ayub

[Akshay Rastogi]

Hi Arshad,

You are welcome.

Regards,

Akshay Rastogi

Remember to mark the answer as correct or rate the helpful posts.