cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


498
Views
0
Helpful
4
Replies

Need to allow TLS_DH_anon_WITH_RC4_128_MD5 in ASA what is the command to do so

                   Hi

Recently we had issue in Microsoft Office communicator, users were not able to share their desktops however the ports are enabled. A microsoft has said that this Cipher suit is normally blocked in firewall and we have to enable it ( TLS_DH_anon_WITH_RC4_128_MD5 ).

Please provide the command to do so.

We are running ASA asa902-smp-k8.bin

4 REPLIES 4
Rising star

Need to allow TLS_DH_anon_WITH_RC4_128_MD5 in ASA what is the co

If you are actually doing this from one interface to another you should see what the ASA is dropping and in that case enable logs at debugging level through ASDM and or CLI and filter our the IP address that is generating the traffic.

If you need assistance on this please let me know.

Value our effort and rate the assistance!
Rising star

Need to allow TLS_DH_anon_WITH_RC4_128_MD5 in ASA what is the co

ASA 8.2: Configure Syslog using ASDM

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b83d04.shtml

Value our effort and rate the assistance!

The ASA won't block any

The ASA won't block any cypher suite unless its specifically configured to terminate the TLS/SSL session,.

At a guess its probably being directed to a server that does not support that cipher suite.

Highlighted
Beginner

Re: Need to allow TLS_DH_anon_WITH_RC4_128_MD5 in ASA what is the command to do so

Are yours users behind a proxy?

peter