cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


458
Views
0
Helpful
3
Replies
Beginner

Need to configure HSRP in router,But i have only one gateway in ASA

Need to configure HSRP in routers, But in ASA i have only one gateway

                                      ROUTER 1-->ISP1

LAN --->ASA--->L3---->

                                      ROUTER 2--->ISP2

in the above setup explain,In ASA, 2 interface used to configured VLANS , one interface for failover , One inteface for Uplink.And natting is done in router 1. I want to configure HSRP between the routers for each vlan so that i manage the traffic in ISP it need to go.Is there any idea to help me out.

Thnaks in advance

3 REPLIES 3
Cisco Employee

Re: Need to configure HSRP in router,But i have only one gateway

That is the only GW you need on the ASA.

The GW on the ASA will point to the HSRP address and not the physical address on the routers.

-KS

Highlighted
Beginner

Re: Need to configure HSRP in router,But i have only one gateway

i have mutliple Vlan reaching to router which is passwng through, So for each VLAN i can create the HSRP i.e., virtual IP address so that i can decide the load balancing using the priority in which router it need to pass.By that way i'll be  having each gateway virtual IP.But in ASA i can only point one gateway.is there any other way to have mutiple gateway in ASA ?

And thanks for quick reply

Cisco Employee

Re: Need to configure HSRP in router,But i have only one gateway

I am not sure I understand why you want multiple default gateways.

You can have multiple HSRP ips for all vlans. and different routes pointing to the HSRP ips. There can only be one default route that will be used for packets destined to routes that do not match any other routes on the box.

PK

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here