cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
509
Views
0
Helpful
1
Replies

Not receiving big e-mail messages - Deny TCP (No Connection)

anunes1987
Level 1
Level 1

Hey guys!

Need your help on a issue

I'm having problems in receive e-mail bigger than 15 Mb , attached on the message. i get the following Logs on ASA:


7|Feb 28 2011|15:21:26|609002|209.85.214.50||||Teardown local-host externa_CC:209.X.X.X duration 0:00:00
6|Feb 28 2011|15:21:26|106015|209.85.214.50|51069|187.32.96.162|25|Deny TCP (no connection) from 209.x.x.x/51069 to 187.x.x.x/25 flags ACK  on interface externa_CTBC
7|Feb 28 2011|15:21:26|609001|209.85.214.50||||Built local-host externa_CTBC:209.85.214.50
7|Feb 28 2011|15:21:26|609002|209.85.214.50||||Teardown local-host externa_CTBC:209.85.214.50 duration 0:00:00
6|Feb 28 2011|15:21:26|106015|209.85.214.50|51069|187.32.96.162|25|Deny TCP (no connection) from 209.85.214.50/51069 to 187.32.96.162/25 flags ACK  on interface externa_CTBC
7|Feb 28 2011|15:21:26|609002|209.85.214.50||||Teardown local-host externa_CTBC:209.85.214.50 duration 0:10:00
6|Feb 28 2011|15:21:26|302014|209.85.214.50|51069|172.20.1.13|25|Teardown TCP connection 387976374 for externa_CTBC:209.85.214.50/51069 to dmz:172.20.1.13/25 duration 0:10:00 bytes 12998556 TCP Reset-I

Does anyone had this kind of problem? What could i do to solve this issue?

1 Accepted Solution

Accepted Solutions

The following line:

6|Feb 28 2011|15:21:26|302014|209.85.214.50|51069|172.20.1.13|25|Teardown TCP connection 387976374 for externa_CTBC:209.85.214.50/51069 to dmz:172.20.1.13/25 duration 0:10:00 bytes 12998556 TCP Reset-I

It shows a Reset-I, that means the internal device send a reset.

The best thing you could do is set captures so that you can view the communcation between the two devices. Apply the capture on the two interfaces involved.

View solution in original post

1 Reply 1

The following line:

6|Feb 28 2011|15:21:26|302014|209.85.214.50|51069|172.20.1.13|25|Teardown TCP connection 387976374 for externa_CTBC:209.85.214.50/51069 to dmz:172.20.1.13/25 duration 0:10:00 bytes 12998556 TCP Reset-I

It shows a Reset-I, that means the internal device send a reset.

The best thing you could do is set captures so that you can view the communcation between the two devices. Apply the capture on the two interfaces involved.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card