reference clock and show clock output doesn't match
below is the ntp status , ntp association & show clock
F1# sh ntp associations
address ref clock st when poll reach delay offset disp
*~X.X.X.X 123.108.200.124 3 882 1024 377 67.2 -5.74 17.3
+~X.X.X.X 106.247.248.106 3 939 1024 377 41.1 -5.66 16.2
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
F1# sh ntp status
Clock is synchronized, stratum 4, reference is 10.224.64.100
nominal freq is 99.9984 Hz, actual freq is 100.0119 Hz, precision is 2**6
reference time is e018d46d.f13d754e (13:10:29.942 IST Thu Feb 21 2019)
clock offset is -5.7405 msec, root delay is 235.23 msec
root dispersion is 63.40 msec, peer dispersion is 17.26 msec
F1# sh clock
13:25:19.015 IST Thu Feb 21 2019