12-04-2012 03:06 AM - edited 03-11-2019 05:32 PM
Hi all,
eth0/0 = 60.54.x.x
internal server IP = 172.47.1.10
I have a ASA 5510. I want to access the internal server IP through the ASA via http://60.54.x.x:8080/sms/DnNotify ( via port 8080).
How do i configure it? NAT? ACL? configure port?
Solved! Go to Solution.
12-05-2012 07:05 AM
Hi
1)This is after considering that you have configured the interface.
2)The Server is behind the interface named dmz.
3)The Interface on which connection lands from the internet is named as outside.
access-list outsidein extended permit tcp any host 60.54.x.x eq 8080
access-group outsidein in interface outside
static (dmz,outside) tcp 60.54.x.x 8080 172.47.1.10 80 netmask 255.255.255.255
Rate it if it is helpful !
12-04-2012 03:36 AM
Hi Nizam
Please confirm following things
Software version you are running on firewall you will get it with "show version".
If you are opening the server from inside LAN which port you are actually using
i.e
http://172.47.1.10/ ??????????
12-05-2012 04:22 AM
Hi,
ASA version is 8.0(4).
From inside is using port 80
12-05-2012 07:05 AM
Hi
1)This is after considering that you have configured the interface.
2)The Server is behind the interface named dmz.
3)The Interface on which connection lands from the internet is named as outside.
access-list outsidein extended permit tcp any host 60.54.x.x eq 8080
access-group outsidein in interface outside
static (dmz,outside) tcp 60.54.x.x 8080 172.47.1.10 80 netmask 255.255.255.255
Rate it if it is helpful !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide