cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


1364
Views
0
Helpful
16
Replies
Highlighted
Beginner

Re: Problem with NAT with video call on ASA5510

Hello,

Can you enable the sip inspection and provide the following outputs:

debug sip

debug sip ha

show logg

Regards,

Luis Sandi

.:|:.:|:.

P.S Please mark this question as answered if it has been resolved. Do rate helpful posts.

Re: Problem with NAT with video call on ASA5510

Couple of things:

You may need a Nat entry  - Static preferably  for

10.4.86.199  otherwise the media connection address goes unNATed.

Traffic from the 172 address takes the source static NAT defined hence gets to your endpoint.  Having said that it seems either the symptoms described is reversed.

However as seen in your packet tracer you need Destination NAT for

10.4.86.102  when you try to use that address to translate to a 172 endpoint.  Otherwise

it is not translated.  ( as you see in your tracer, the packet isnt getting anywhere)

You do need global SIP inspect.

Unclear on the complete picture and symptoms but those may be some pointers to chase.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here