cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


223
Views
10
Helpful
4
Replies
Highlighted
Beginner

Restore Startup-Config file to ASA 5520

Can anyone tell me how to restore an edited startup-config to my ASA 5520 from my TFTP server with the CLI?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: Restore Startup-Config file to ASA 5520

how about below steps :

 

#copy tftp start
Address or name of remote host [10,10.10.10]?
Source filename [myconfig-confg]? myconfig-confg
Destination filename [startup-config]?
Accessing tftp://10.10.10.10/myconfig-confg...
Loading myconfig-confg from 10.10.10.10 (via Vlan1): !
[OK - XXXXX bytes]
[OK]

Worthing1#

BB
*** Rate All Helpful Responses ***

View solution in original post

4 REPLIES 4
VIP Advisor

Re: Restore Startup-Config file to ASA 5520

how about below steps :

 

#copy tftp start
Address or name of remote host [10,10.10.10]?
Source filename [myconfig-confg]? myconfig-confg
Destination filename [startup-config]?
Accessing tftp://10.10.10.10/myconfig-confg...
Loading myconfig-confg from 10.10.10.10 (via Vlan1): !
[OK - XXXXX bytes]
[OK]

Worthing1#

BB
*** Rate All Helpful Responses ***

View solution in original post

Beginner

Re: Restore Startup-Config file to ASA 5520

Thank you for your quick response!  I thought this might be the way to do it, but I just wanted to speak with others who have had success before I tried anything.  Firewalls are (obviously) not my area of expertise.  

Beginner

Re: Restore Startup-Config file to ASA 5520

Try this:

 

##copy tftp: startup
Address or name of remote host ? your tftp server ip
Source filename ? your edited startup
Destination filename [startup-config]?
Accessing tftp://your-tftp-ip/your edited startup

 

Cheers,

Beginner

Re: Restore Startup-Config file to ASA 5520

Thank you for your help!

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here