I have a requirment to allow a vendor access to a lot of devices on a subinter face DMZ which I created just for their devices.
However I only have one public address left to allow access from the outside.
They need specific udp and tcp ports open depending on which device they are accessing. I created object-group service config for all the ports but not sure how to actually allow the outside access into the DMZ.
device 192.168.13.6 needs access both ways on udp ports 18810,18803,18801 and 18001. And this same device needs access both ways on tcp port18802.
And device 192.168.13.2 needs another set of udp and tcp ports open.
All of the devices have variations like this.
What is the correct static nat config to allow the vendor access from outside to many addr in this DMZ?
Posting this for anyone interested in using a Raspberry PI as a flow collector for Stealthwatch. We created a very lightweight version of our software. It can create flows if the eth port is attached to a SPAN or you can forward NetFlow/IPFIX ...
Dear Team Suppose we have hundreds of rules in access policy on cisco fmc device. Now I want to fetch all access policy rules in which I have mentioned some specific port number X. Can anyone help me with the process to fetch the same?
Greetings everyone, Happy New Year! I would like to thank you all for making our ISE demos in dCloud a great success!
The ISE instant demo has been in the top 5 of Enterprise demos for a long time now and recently just moved into the #1 and 2 slots...
User Experience Enhancements
As part of the Cisco Common User Experience program, we are working towards a more uniform user experience and terminology alignment. This program runs across all Cisco security products.
A More Intuitive Cognitiv...