So my situation is kind of unique. I'm currently configuring an ASA5510 (ver. 8.4) to replace an OpenBSD router box. My company was originally given a /24 of public IP's.....yes it's weird. We are currenly working on eliminating the public vlan in our office. Currently half the company is using these public IPs for their computers and half are on a private vlan. We also have several servers on the public vlan. Everything is connected to a layer 3 switch that routes between these computers. When we first implement the ASA we want to leave the servers on the public vlan and have them still accessible from the outside by the same IP address. Currently the OpenBSD box just doesn't NAT the public vlan.
We were looking at 2 solutions.
1. NAT the server IPs to itself. ie. if the server has an IP of 220.127.116.11 then the nat statement would looke something like:
nat (inside,outside) 18.104.22.168 22.214.171.124
This is what we think would work best.
2. We create a nat exemption rule for that entire public vlan.
Is our theory correct that option 1 works best? Any other suggestions? We do not want to implement a DMZ because we have such sensitive data and only our web server could exist in our DMZ. My company is small....the simpler the solution, the better.
Threat Response Basics
What is Threat Response and how can it help my organization?
What is the cost of Threat Response?
What are the deployment options for Threat Response?
Is Threat Response available outside of the United States?
Gartner has once again named Cisco a Leader in the Magic Quadrant for Network Firewalls. This distinction recognizes Cisco's ingenuity in redefining the firewall as the basis for an integrated security platform.
Find out how Cisco stands out from the comp...
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...