cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


1004
Views
0
Helpful
3
Replies
Highlighted
Beginner

unable to reserve port 5060

Hi guys!

Try to configure static NAT to port 5060 and get an error "unable to reserve port 5060" sip inspection disabled

Cisco asa 5505

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi Artem,

Hi Artem,

Could you check if there are any existing connections and xlate enties for the port 5060  ?

sh connection | in 5060 and show xlate | in 5060 

If there is any entry try clearing it using clear xlate/clear conn command and then try applying the static NAT.

Regards,

Aditya

Please rate helpful posts and mark correct answers.

3 REPLIES 3
Cisco Employee

Hi Artem,

Hi Artem,

Could you check if there are any existing connections and xlate enties for the port 5060  ?

sh connection | in 5060 and show xlate | in 5060 

If there is any entry try clearing it using clear xlate/clear conn command and then try applying the static NAT.

Regards,

Aditya

Please rate helpful posts and mark correct answers.

Beginner

Thanks a lot!

Thanks a lot!

I had not thought about that the port could be busy.

It's rly help me!

Cisco Employee

Hi,

Hi,

Glad to assist. :)

Regards,

Aditya

Please rate helpful posts and mark correct answers.