Solved: Hi Artem,

artem.gritchin · ‎05-19-2016

Hi guys!

Try to configure static NAT to port 5060 and get an error "unable to reserve port 5060" sip inspection disabled

Cisco asa 5505

Aditya Ganjoo · ‎05-19-2016

Hi Artem,

Could you check if there are any existing connections and xlate enties for the port 5060 ?

sh connection | in 5060 and show xlate | in 5060

If there is any entry try clearing it using clear xlate/clear conn command and then try applying the static NAT.

Regards,

Aditya

Please rate helpful posts and mark correct answers.

Aditya Ganjoo · ‎05-19-2016

Hi Artem,

Could you check if there are any existing connections and xlate enties for the port 5060 ?

sh connection | in 5060 and show xlate | in 5060

If there is any entry try clearing it using clear xlate/clear conn command and then try applying the static NAT.

Regards,

Aditya

Please rate helpful posts and mark correct answers.

artem.gritchin · ‎05-19-2016

Thanks a lot!

I had not thought about that the port could be busy.

It's rly help me!

Aditya Ganjoo · ‎05-19-2016

Hi,

Glad to assist. :)

Regards,

Aditya

Please rate helpful posts and mark correct answers.