05-01-2012 08:51 AM - edited 03-11-2019 04:00 PM
Hi,
Is it possible to upgrade directly from 8.0(4) to 8.2(5) software in 5510. Is there be any workaround in regards to the config.
Thanks,
05-01-2012 09:55 AM
Hi Sal,
there is no much differences as far as 8.0(4) and 8.2(5) are concern, so you are safe to upgrade to 8.2(5) from 8.0(4).
Hope that answers your question.
thanks
05-01-2012 09:57 AM
It's no problem to do that upgrade directly. I've done it several times following Cisco's published upgrade procedure.
For a single unit just copy the new bin file to disk0:, change the boot image command, save config and reload. For an HA pair, follow this procedure.
In either case, be sure to update your ASDM to 6.4(7) while you're at it.
05-01-2012 01:51 PM
Thanks you Marvin and rizwanr, It's a production box in HA, I am trying this change this week, hopefully everything go as plan, I will let you guys know the outcome....
Have a great day.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: