Top Tagged - Cisco Community

How to reset the VLAN and VTP information back to factory defaults in Cisco Catalyst switches - ( ‎06-22-2009 06:09 PM )

by on

0 Replies 29189 Views

0 Replies

29189 Views

The "%SYS-5-SYS_TIMECHNG: System time has changed to due to summertime" error message is received in... - ( ‎06-22-2009 06:09 PM )

by on

0 Replies 1312 Views

0 Replies

1312 Views

Slow performance of LAN due to a high degree of multicast traffic or frequent disruption of multicas... - ( ‎06-22-2009 05:40 PM )

by on

0 Replies 13203 Views

0 Replies

13203 Views

Configure ISL trunking between Catalyst switches that run CatOS and Cisco IOS (native mode) - ( ‎06-22-2009 03:40 PM )

by on

0 Replies 1229 Views

0 Replies

1229 Views

A SPAN destination port is shown as "not connected" and does not communicate with the rest of the ne... - ( ‎06-22-2009 05:35 PM )

by on

0 Replies 6752 Views

0 Replies

6752 Views

Fan LED on Catalyst 4000, 5000 or 6000 series modular chassis is not green due to a hardware problem - ( ‎06-22-2009 03:40 PM )

by on

0 Replies 402 Views

0 Replies

402 Views

Packet loss may occur when user connects to a server due to misconfiguration, NIC compatibility or p... - ( ‎06-22-2009 03:39 PM )

by on

0 Replies 921 Views

0 Replies

921 Views

The "port is a non-802.1q port" error message is displayed on Cisco Catalyst switches that run CatOS - ( ‎06-22-2009 05:34 PM )

by on

0 Replies 978 Views

0 Replies

978 Views

How to configure a default gateway on the Catalyst 6500, 6000, 5500, or 5000 series running CatOS so... - ( ‎06-22-2009 03:38 PM )

by on

0 Replies 8879 Views

0 Replies

8879 Views

Card in a modular Catalyst 4000, 5000 or 6000 series chassis does not function properly or is not on... - ( ‎06-22-2009 05:33 PM )

by on

0 Replies 2401 Views

0 Replies

2401 Views

%SYS-4-P2_WARN: 1/Invalid traffic from multicast source address message is displayed on a Catalyst s... - ( ‎06-22-2009 03:35 PM )

by on

0 Replies 2196 Views

0 Replies

2196 Views

Periodic "convert_post_SAC_CiscoMIB:" syslog messages are generated on the switch due to a different... - ( ‎06-22-2009 05:30 PM )

by on

0 Replies 504 Views

0 Replies

504 Views

The Not enough space on device message is displayed when user attempts to copy to a Flash device, ev... - ( ‎06-22-2009 03:34 PM )

by on

0 Replies 8956 Views

0 Replies

8956 Views

The %MCAST-4-RX_JNRANGE: IGMP: Rcvd Report in the range 01-00-5e-00-00-xx message is logged due to i... - ( ‎06-22-2009 03:34 PM )

by on

0 Replies 1140 Views

0 Replies

1140 Views

Periodic CatOS convert_post_SAC_CiscoMIB: syslog messages are generated on the switch - ( ‎06-22-2009 03:31 PM )

by on

0 Replies 391 Views

0 Replies

391 Views

Supervisor password becomes unknown due to the incorrect configuration of the set password or set en... - ( ‎06-22-2009 03:31 PM )

by on

0 Replies 544 Views

0 Replies

544 Views

How to configure EtherChannel between a Cisco Catalyst switch that runs CatOS and a workstation or s... - ( ‎06-22-2009 03:31 PM )

by on

0 Replies 2937 Views

0 Replies

2937 Views

The port status is "errdisable" due to a UniDirectional Link Detection condition - ( ‎06-22-2009 05:12 PM )

by on

0 Replies 35173 Views

0 Replies

35173 Views

The power supply LED is red or has a "faulty" status on a Catalyst 4000, 5000, or 6000 series switch - ( ‎06-22-2009 05:12 PM )

by on

0 Replies 11989 Views

0 Replies

11989 Views

How to configure port security on Cisco Catalyst switches running CatOS - ( ‎06-22-2009 05:11 PM )

by on

0 Replies 4544 Views

0 Replies

4544 Views

The "%SYS-1-CFG_RESTORE: [chars] block restored from backup" message is logged on a Catalyst Switch ... - ( ‎06-18-2009 04:01 PM )

by on

0 Replies 527 Views

0 Replies

527 Views

Port status is errdisable due to EtherChannel misconfiguration - ( ‎06-22-2009 05:10 PM )

by on

0 Replies 20556 Views

0 Replies

20556 Views

The "%SYS-2-MALLOCFAIL" messages are displayed in the logs of Catalyst switches - ( ‎06-18-2009 04:00 PM )

by on

0 Replies 4551 Views

0 Replies

4551 Views

How to block IP address access to a CatOS switch with the IP permit list - ( ‎06-22-2009 05:09 PM )

by on Latest post on by

1 Replies 7100 Views

1 Replies

7100 Views

How to configure a Cisco Catalyst switch as a VMPS - ( ‎06-22-2009 05:09 PM )

by on

0 Replies 11318 Views

0 Replies

11318 Views

How to configure PVLAN in a Cisco Catalyst switch that runs Catalyst OS system software - ( ‎06-22-2009 05:08 PM )

by on

0 Replies 2838 Views

0 Replies

2838 Views

Error message received "%MLS-4-MOVEOVERFLOW:Too many moves, stop MLS for 5 sec" in Catalyst 5000 ser... - ( ‎06-22-2009 05:08 PM )

by on

0 Replies 1964 Views

0 Replies

1964 Views

How to configure Console and Telnet passwords on a Catalyst 6500 series switch running CatOS - ( ‎06-22-2009 05:08 PM )

by on

0 Replies 8017 Views

0 Replies

8017 Views

Switch ports become inactive when they are members of VLANs that do not exist in the VLAN database o... - ( ‎06-22-2009 05:06 PM )

by on Latest post on by

1 Replies 14839 Views

1 Replies

14839 Views

Periodic "%KERNEL-5-UNALIGNACCESS:Alignment correction made syslog messages are generated on the swi... - ( ‎06-18-2009 03:56 PM )

by on

0 Replies 452 Views

0 Replies

452 Views

MLS software feature in CatOS does not function due to configuration errors on the Catalyst 6500, 60... - ( ‎06-18-2009 03:55 PM )

by on

0 Replies 874 Views

0 Replies

874 Views

Redundant supervisor engines do not synchronize - ( ‎06-18-2009 03:52 PM )

by on

0 Replies 2354 Views

0 Replies

2354 Views

How to upgrade Cisco IOS Software on Catalyst 6500/6000, 5500/5000 and 4500/4000 family Layer 3 rout... - ( ‎06-18-2009 03:51 PM )

by on

0 Replies 5009 Views

0 Replies

5009 Views

The "%SYS-2-FAN_FAIL" error message is displayed in the logs of a Catalyst switch - ( ‎06-22-2009 04:46 PM )

by on

0 Replies 2262 Views

0 Replies

2262 Views

Supervisor Engine module does not come online due to continuous booting loop, invalid boot variable,... - ( ‎06-22-2009 04:45 PM )

by on

0 Replies 1548 Views

0 Replies

1548 Views

Catalyst switch running CatOS getting the error message %SPANTREE-7-MSGAGEEXPIRY: Msg Age timer expi... - ( ‎06-22-2009 04:41 PM )

by on

0 Replies 1754 Views

0 Replies

1754 Views

Recovering from ErrDisabled port due to misconfiguration - ( ‎06-22-2009 04:39 PM )

by on Latest post on by

2 Replies 221945 Views

2 Replies

221945 Views

How to configure the Gigabit Ethernet fiber-optic interface to support duplex speed in Cisco Catalys... - ( ‎06-22-2009 04:11 PM )

by on

0 Replies 9274 Views

0 Replies

9274 Views

The Error Msg: mfree 2: m= [Hex] , m_type=0 PID = 0 Kernel an error message appears in the logs of a... - ( ‎06-22-2009 04:06 PM )

by on

0 Replies 677 Views

0 Replies

677 Views

The %MGMT-4-OUTOFNVRAM: Out of NVRAM space: error error message is seen on Cisco Catalyst switches r... - ( ‎06-22-2009 04:04 PM )

by on

0 Replies 781 Views

0 Replies

781 Views

Catalyst switches that run CatOS generate the %SYS-3-P2_ERROR: 1/Have run out of vbufs (internal buf... - ( ‎06-22-2009 04:04 PM )

by on

0 Replies 445 Views

0 Replies

445 Views

Port status is errdisable due to BPDU guard - ( ‎06-22-2009 04:02 PM )

by on

0 Replies 172080 Views

0 Replies

172080 Views

Cisco Nexus 5596UP NX-OS upgrade Fan Problem - ( ‎07-02-2012 05:35 AM )

by on Latest post on by

1 Replies 1074 Views

1 Replies

1074 Views

Regarding a GNS3 with Switch.... - ( ‎07-14-2010 10:55 PM )

by on Latest post on by

4 Replies 20307 Views

4 Replies

20307 Views

Question on 65k QOS configuration - ( ‎01-07-2010 01:03 AM )

by on Latest post on by

1 Replies 1372 Views

1 Replies

1372 Views

How do you save / restore the running-config on a TFTP server of Cisco 5505 CAT OS switch? - ( ‎12-05-2009 08:11 AM )

by on Latest post on by

4 Replies 2482 Views

4 Replies

2482 Views