Latest Tagged - Cisco Community

The %MCAST-4-RX_LVRANGE: IGMP: Rcvd Leave in the range of 01-00-5e-00-00-xx error Or %MCAST-5-RX_IGM... - ( ‎06-22-2009 04:11 PM )

by on

0 Comments 1785 Views

0 Comments

1785 Views

MSFC2 crashes with a parity error exception message - ( ‎06-22-2009 04:07 PM )

by on

0 Comments 715 Views

0 Comments

715 Views

EtherChannel configuration attempt fails and user receives the port state message "Up Unsuit Not-in-... - ( ‎06-22-2009 04:07 PM )

by on

0 Comments 1983 Views

0 Comments

1983 Views

The "Global checksum failed" error message appears in Catalyst 4000/4500 and 6000/6500 series switch... - ( ‎06-22-2009 04:07 PM )

by on

0 Comments 2175 Views

0 Comments

2175 Views

Continuous boot loop due to insufficient memory - ( ‎06-22-2009 04:08 PM )

by on

0 Comments 3973 Views

0 Comments

3973 Views

The "%PM-SP-3-ERR_INCOMP_PORT:" error message is received on Catalyst 6500 Series Switches that run ... - ( ‎06-22-2009 04:08 PM )

by on

0 Comments 1568 Views

0 Comments

1568 Views

Router loads Cisco IOS after a tftpdnld command upgrade, yet no file is in Flash due to the -r switc... - ( ‎06-22-2009 04:09 PM )

by on

0 Comments 4049 Views

0 Comments

4049 Views

TFTP transfer fails with a Not enough space on device error message due to the command line interfac... - ( ‎06-22-2009 04:10 PM )

by on Latest post on by

1 Comments 39657 Views

1 Comments

39657 Views

The user receives the %ACL-3-RACLMAPCOMMITFAIL error message when applying the ACL - ( ‎06-22-2009 04:10 PM )

by on

0 Comments 768 Views

0 Comments

768 Views

User receives the OSPF-4-NONEIGHBOR error message and database description from an unknown neighbor - ( ‎06-22-2009 04:10 PM )

by on Latest post on by

1 Comments 5911 Views

1 Comments

5911 Views

The %RF-4-MEMORY_SIZE_MISMATCH error message is displayed in the logs, and a duplicate interface VLA... - ( ‎06-22-2009 04:10 PM )

by on

0 Comments 613 Views

0 Comments

613 Views

User receives a SCHED-3-THRASHING error message - ( ‎06-22-2009 04:10 PM )

by on

0 Comments 1079 Views

0 Comments

1079 Views

Configure Access Control Lists on multicast packets for the Catalyst 6500/6000 series switches when ... - ( ‎06-22-2009 04:11 PM )

by on

0 Comments 929 Views

0 Comments

929 Views

Users receive the "%ONLINE-SP-6-DNLDFAIL" error message in the logs of a Catalyst 6500 series switch - ( ‎07-01-2009 04:19 AM )

by on

0 Comments 1554 Views

0 Comments

1554 Views

The user receives the %L3_ASIC-DFC3-4-ERR_INTRPT: Interrupt TF_INT:FI_DATA_INT error message in Cata... - ( ‎06-22-2009 04:12 PM )

by on

0 Comments 529 Views

0 Comments

529 Views

IPv6 - Frequently Asked Questions (FAQ) - ( ‎05-11-2011 04:51 AM )

by on Latest post on by

2 Comments 52608 Views

2 Comments

52608 Views

Content Switching Module (CSM) resets with the %C6KPWR-SP-4-DISABLED: power to module in slot [dec] ... - ( ‎06-22-2009 04:12 PM )

by on

0 Comments 718 Views

0 Comments

718 Views

Catalyst 6500 series switches with Supervisor III that runs Cisco IOS resets due to watchdog timeout... - ( ‎06-22-2009 04:12 PM )

by on

0 Comments 1714 Views

0 Comments

1714 Views

Module resets and user receives the %SYS-3-MOD_PORTINTFINSYNC:Port Interface in sync for Module erro... - ( ‎06-22-2009 04:13 PM )

by on

0 Comments 956 Views

0 Comments

956 Views

The "%MLSM-6-MMLS_MODE_CHANGE: MMLS:" error message appears in Catalyst 6500 series switches running... - ( ‎06-22-2009 04:13 PM )

by on

0 Comments 1711 Views

0 Comments

1711 Views

How to recover Cisco Catalyst switches that run Cisco IOS system software from the errDisable port s... - ( ‎06-22-2009 04:13 PM )

by on

0 Comments 13338 Views

0 Comments

13338 Views

Cisco 851w POST Error 6 - What to do? - ( ‎09-23-2009 06:05 AM )

by on

0 Comments 1337 Views

0 Comments

1337 Views

Getting the DUAL-3-SIA EIGRP error message - ( ‎06-22-2009 04:13 PM )

by on

0 Comments 2645 Views

0 Comments

2645 Views

Supervisor 720 based Catalyst 6500 and 7600 Series Switches running Cisco IOS display the "SP: Linec... - ( ‎06-22-2009 04:14 PM )

by on

0 Comments 2281 Views

0 Comments

2281 Views

Unable to Telnet to other devices, and the %telnet connections not permitted from this terminal erro... - ( ‎06-22-2009 04:14 PM )

by on Latest post on by

2 Comments 48390 Views

2 Comments

48390 Views

Temperature alarms on WS-X6904-40G - ( ‎04-16-2015 01:24 AM )

by on

0 Comments 1020 Views

0 Comments

1020 Views

A Catalyst 6500 Switch that runs CatOS crashes due to a "TLB (Load/Fetch) Exception" while the set v... - ( ‎06-22-2009 04:04 PM )

by on

0 Comments 1154 Views

0 Comments

1154 Views

The Cisco Catalyst 6000/6500 Series switch receives the VLAN(s) not available in Port Manager error ... - ( ‎06-22-2009 03:42 PM )

by on

0 Comments 1090 Views

0 Comments

1090 Views

Port adapter is not supported in a Cisco 7200 VXR chassis due to early hardware revision - ( ‎06-22-2009 03:43 PM )

by on Latest post on by

1 Comments 2902 Views

1 Comments

2902 Views

The %Error opening flash:update/info (No such file or directory) error message is received on a Cata... - ( ‎06-22-2009 03:43 PM )

by on

0 Comments 20979 Views

0 Comments

20979 Views

User receives "%SYS-3-MOD_FAILREASON:Module [dec] failed due to unsupported daughtercard" error mess... - ( ‎06-22-2009 06:15 PM )

by on

0 Comments 814 Views

0 Comments

814 Views

Port status is errdisable due to BPDU guard - ( ‎06-22-2009 04:02 PM )

by on

0 Comments 223939 Views

0 Comments

223939 Views

Understanding MSFC, PFC and DFC roles in Catalyst 6500 Series Switch - ( ‎12-15-2011 03:25 AM )

by on Latest post on by

21 Comments 137277 Views

21 Comments

137277 Views

The user receives the %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number [chars]: acces... - ( ‎06-22-2009 04:02 PM )

by on

0 Comments 6263 Views

0 Comments

6263 Views

The Cisco Catalyst 4500 switch with SupV running Cisco IOS Software version 12.2(25)EWA reboots with... - ( ‎06-22-2009 04:02 PM )

by on

0 Comments 1015 Views

0 Comments

1015 Views

The %FABRIC-SP-6-TIMEOUT_ERR: error message is received in Catalyst 6500 series switches that runs ... - ( ‎06-22-2009 04:03 PM )

by on

0 Comments 5218 Views

0 Comments

5218 Views

Cisco Catalyst 4500/4000 series switches display the %C4K_CHASSIS-3-UNKNOWNLINECARD error message wh... - ( ‎06-22-2009 04:03 PM )

by on

0 Comments 1796 Views

0 Comments

1796 Views

The "%C6KENV-SP-4-MINORTEMPALARM:" error message displays in Catalyst 6500 series switches with Sup7... - ( ‎06-22-2009 04:04 PM )

by on Latest post on by

1 Comments 10103 Views

1 Comments

10103 Views

STP error message received: %SPANTREE-2-ROOTGUARD_BLOCK: Root guard blocking port in Cisco Catalys... - ( ‎06-22-2009 06:17 PM )

by on

0 Comments 18156 Views

0 Comments

18156 Views

Error messages "%SYS-4-NVLOG:SYNDIAGS:Module 1 detected Local Bus Stall" and "%SYS-4-NVLOG:SYNDIAGS:... - ( ‎06-22-2009 03:42 PM )

by on

0 Comments 1698 Views

0 Comments

1698 Views

The %MLS-6-MCAST_L3FLOW: and %MCAST-6-DELGDA: error messages are received in Catalyst 6000/6500 S... - ( ‎06-22-2009 04:04 PM )

by on

0 Comments 975 Views

0 Comments

975 Views

Catalyst switches that run CatOS generate the %SYS-3-P2_ERROR: 1/Have run out of vbufs (internal buf... - ( ‎06-22-2009 04:04 PM )

by on

0 Comments 648 Views

0 Comments

648 Views

The %MGMT-4-OUTOFNVRAM: Out of NVRAM space: error error message is seen on Cisco Catalyst switches r... - ( ‎06-22-2009 04:04 PM )

by on

0 Comments 947 Views

0 Comments

947 Views

The user receives the %SYS-4-CONFIG_RESOLVE_FAILURE: error message in Catalyst switches that run Cis... - ( ‎06-22-2009 04:06 PM )

by on Latest post on by

2 Comments 58935 Views

2 Comments

58935 Views

The user receives the "%sys-1-sys_overpwrrtng: system drawing more power than the power supply ratin... - ( ‎06-30-2009 05:39 AM )

by on

0 Comments 713 Views

0 Comments

713 Views

SegV exceptions - ( ‎06-22-2009 04:06 PM )

by on

0 Comments 2935 Views

0 Comments

2935 Views

User unable to configure static NAT, receives the % Non-Static entry already exists error message - ( ‎06-22-2009 04:06 PM )

by on Latest post on by

1 Comments 6987 Views

1 Comments

6987 Views

The NVRAM Verification Failed or "startup-config file open failed (No such device)" error message ... - ( ‎06-22-2009 04:06 PM )

by on Latest post on by

1 Comments 28100 Views

1 Comments

28100 Views

The %SYS-4-SYS_LCPERR4:Module [dec]: LTL Parity error detected on Coil #[dec] error message appears... - ( ‎06-22-2009 04:06 PM )

by on

0 Comments 3606 Views

0 Comments

3606 Views

OIR events occur on Cisco 3600 series routers - ( ‎06-22-2009 04:06 PM )

by on

0 Comments 1520 Views

0 Comments

1520 Views