Latest Tagged - Cisco Community

The NVRAM Verification Failed or "startup-config file open failed (No such device)" error message ... - ( ‎06-22-2009 04:06 PM )

by on Latest post on by

1 Replies 28058 Views

1 Replies

28058 Views

Unable to Telnet to other devices, and the %telnet connections not permitted from this terminal erro... - ( ‎06-22-2009 04:14 PM )

by on Latest post on by

2 Replies 48274 Views

2 Replies

48274 Views

Getting the DUAL-3-SIA EIGRP error message - ( ‎06-22-2009 04:13 PM )

by on

0 Replies 2637 Views

0 Replies

2637 Views

Module resets and user receives the %SYS-3-MOD_PORTINTFINSYNC:Port Interface in sync for Module erro... - ( ‎06-22-2009 04:13 PM )

by on

0 Replies 954 Views

0 Replies

954 Views

The user receives the %L3_ASIC-DFC3-4-ERR_INTRPT: Interrupt TF_INT:FI_DATA_INT error message in Cata... - ( ‎06-22-2009 04:12 PM )

by on

0 Replies 525 Views

0 Replies

525 Views

Understanding MSFC, PFC and DFC roles in Catalyst 6500 Series Switch - ( ‎12-15-2011 03:25 AM )

by on Latest post on by

21 Replies 137028 Views

21 Replies

137028 Views

Port adapter is not supported in a Cisco 7200 VXR chassis due to early hardware revision - ( ‎06-22-2009 03:43 PM )

by on Latest post on by

1 Replies 2895 Views

1 Replies

2895 Views

Cisco Catalyst 4500/4000 series switches display the %C4K_CHASSIS-3-UNKNOWNLINECARD error message wh... - ( ‎06-22-2009 04:03 PM )

by on

0 Replies 1788 Views

0 Replies

1788 Views

Catalyst switches that run CatOS generate the %SYS-3-P2_ERROR: 1/Have run out of vbufs (internal buf... - ( ‎06-22-2009 04:04 PM )

by on

0 Replies 640 Views

0 Replies

640 Views

A Catalyst 6500 Switch that runs CatOS crashes due to a "TLB (Load/Fetch) Exception" while the set v... - ( ‎06-22-2009 04:04 PM )

by on

0 Replies 1149 Views

0 Replies

1149 Views

The %FABRIC-SP-6-TIMEOUT_ERR: error message is received in Catalyst 6500 series switches that runs ... - ( ‎06-22-2009 04:03 PM )

by on

0 Replies 5209 Views

0 Replies

5209 Views

The Cisco Catalyst 6000/6500 Series switch receives the VLAN(s) not available in Port Manager error ... - ( ‎06-22-2009 03:42 PM )

by on

0 Replies 1081 Views

0 Replies

1081 Views

OIR events occur on Cisco 3600 series routers - ( ‎06-22-2009 04:06 PM )

by on

0 Replies 1513 Views

0 Replies

1513 Views

The %RF-4-MEMORY_SIZE_MISMATCH error message is displayed in the logs, and a duplicate interface VLA... - ( ‎06-22-2009 04:10 PM )

by on

0 Replies 611 Views

0 Replies

611 Views

The user receives the %SYS-4-CONFIG_RESOLVE_FAILURE: error message in Catalyst switches that run Cis... - ( ‎06-22-2009 04:06 PM )

by on Latest post on by

2 Replies 58815 Views

2 Replies

58815 Views

Users receive the "%ONLINE-SP-6-DNLDFAIL" error message in the logs of a Catalyst 6500 series switch - ( ‎07-01-2009 04:19 AM )

by on

0 Replies 1551 Views

0 Replies

1551 Views

The "%PM-SP-3-ERR_INCOMP_PORT:" error message is received on Catalyst 6500 Series Switches that run ... - ( ‎06-22-2009 04:08 PM )

by on

0 Replies 1567 Views

0 Replies

1567 Views

The "Global checksum failed" error message appears in Catalyst 4000/4500 and 6000/6500 series switch... - ( ‎06-22-2009 04:07 PM )

by on

0 Replies 2167 Views

0 Replies

2167 Views

Getting unknown routing protocol error message when configuring OSPF - ( ‎06-22-2009 04:06 PM )

by on

0 Replies 3009 Views

0 Replies

3009 Views

The %MGMT-4-OUTOFNVRAM: Out of NVRAM space: error error message is seen on Cisco Catalyst switches r... - ( ‎06-22-2009 04:04 PM )

by on

0 Replies 941 Views

0 Replies

941 Views

Error messages "%SYS-4-NVLOG:SYNDIAGS:Module 1 detected Local Bus Stall" and "%SYS-4-NVLOG:SYNDIAGS:... - ( ‎06-22-2009 03:42 PM )

by on

0 Replies 1692 Views

0 Replies

1692 Views

Configure Access Control Lists on multicast packets for the Catalyst 6500/6000 series switches when ... - ( ‎06-22-2009 04:11 PM )

by on

0 Replies 926 Views

0 Replies

926 Views

The user receives the %ACL-3-RACLMAPCOMMITFAIL error message when applying the ACL - ( ‎06-22-2009 04:10 PM )

by on

0 Replies 764 Views

0 Replies

764 Views

TFTP transfer fails with a Not enough space on device error message due to the command line interfac... - ( ‎06-22-2009 04:10 PM )

by on Latest post on by

1 Replies 39629 Views

1 Replies

39629 Views

Router loads Cisco IOS after a tftpdnld command upgrade, yet no file is in Flash due to the -r switc... - ( ‎06-22-2009 04:09 PM )

by on

0 Replies 4045 Views

0 Replies

4045 Views

User receives the OSPF-4-NONEIGHBOR error message and database description from an unknown neighbor - ( ‎06-22-2009 04:10 PM )

by on Latest post on by

1 Replies 5896 Views

1 Replies

5896 Views

User receives "%SYS-3-MOD_FAILREASON:Module [dec] failed due to unsupported daughtercard" error mess... - ( ‎06-22-2009 06:15 PM )

by on

0 Replies 810 Views

0 Replies

810 Views

SegV exceptions - ( ‎06-22-2009 04:06 PM )

by on

0 Replies 2924 Views

0 Replies

2924 Views

The "%C6KENV-SP-4-MINORTEMPALARM:" error message displays in Catalyst 6500 series switches with Sup7... - ( ‎06-22-2009 04:04 PM )

by on Latest post on by

1 Replies 10092 Views

1 Replies

10092 Views

How to recover Cisco Catalyst switches that run Cisco IOS system software from the errDisable port s... - ( ‎06-22-2009 04:13 PM )

by on

0 Replies 13330 Views

0 Replies

13330 Views

Content Switching Module (CSM) resets with the %C6KPWR-SP-4-DISABLED: power to module in slot [dec] ... - ( ‎06-22-2009 04:12 PM )

by on

0 Replies 715 Views

0 Replies

715 Views

The user receives the %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number [chars]: acces... - ( ‎06-22-2009 04:02 PM )

by on

0 Replies 6238 Views

0 Replies

6238 Views

MSFC2 crashes with a parity error exception message - ( ‎06-22-2009 04:07 PM )

by on

0 Replies 712 Views

0 Replies

712 Views

The %SYS-4-SYS_LCPERR4:Module [dec]: LTL Parity error detected on Coil #[dec] error message appears... - ( ‎06-22-2009 04:06 PM )

by on

0 Replies 3601 Views

0 Replies

3601 Views

Port status is errdisable due to BPDU guard - ( ‎06-22-2009 04:02 PM )

by on

0 Replies 223582 Views

0 Replies

223582 Views

The %MCAST-4-RX_LVRANGE: IGMP: Rcvd Leave in the range of 01-00-5e-00-00-xx error Or %MCAST-5-RX_IGM... - ( ‎06-22-2009 04:11 PM )

by on

0 Replies 1779 Views

0 Replies

1779 Views

Supervisor 720 based Catalyst 6500 and 7600 Series Switches running Cisco IOS display the "SP: Linec... - ( ‎06-22-2009 04:14 PM )

by on

0 Replies 2279 Views

0 Replies

2279 Views

Cisco 851w POST Error 6 - What to do? - ( ‎09-23-2009 06:05 AM )

by on

0 Replies 1333 Views

0 Replies

1333 Views

User receives a SCHED-3-THRASHING error message - ( ‎06-22-2009 04:10 PM )

by on

0 Replies 1079 Views

0 Replies

1079 Views

The %MLS-6-MCAST_L3FLOW: and %MCAST-6-DELGDA: error messages are received in Catalyst 6000/6500 S... - ( ‎06-22-2009 04:04 PM )

by on

0 Replies 969 Views

0 Replies

969 Views

STP error message received: %SPANTREE-2-ROOTGUARD_BLOCK: Root guard blocking port in Cisco Catalys... - ( ‎06-22-2009 06:17 PM )

by on

0 Replies 18117 Views

0 Replies

18117 Views

The %Error opening flash:update/info (No such file or directory) error message is received on a Cata... - ( ‎06-22-2009 03:43 PM )

by on

0 Replies 20961 Views

0 Replies

20961 Views

User unable to configure static NAT, receives the % Non-Static entry already exists error message - ( ‎06-22-2009 04:06 PM )

by on Latest post on by

1 Replies 6980 Views

1 Replies

6980 Views

Continuous boot loop due to insufficient memory - ( ‎06-22-2009 04:08 PM )

by on

0 Replies 3964 Views

0 Replies

3964 Views

EtherChannel configuration attempt fails and user receives the port state message "Up Unsuit Not-in-... - ( ‎06-22-2009 04:07 PM )

by on

0 Replies 1980 Views

0 Replies

1980 Views

The user receives the "%sys-1-sys_overpwrrtng: system drawing more power than the power supply ratin... - ( ‎06-30-2009 05:39 AM )

by on

0 Replies 711 Views

0 Replies

711 Views

The Cisco Catalyst 4500 switch with SupV running Cisco IOS Software version 12.2(25)EWA reboots with... - ( ‎06-22-2009 04:02 PM )

by on

0 Replies 1011 Views

0 Replies

1011 Views

Catalyst 6500 series switches with Supervisor III that runs Cisco IOS resets due to watchdog timeout... - ( ‎06-22-2009 04:12 PM )

by on

0 Replies 1710 Views

0 Replies

1710 Views

IPv6 - Frequently Asked Questions (FAQ) - ( ‎05-11-2011 04:51 AM )

by on Latest post on by

2 Replies 52570 Views

2 Replies

52570 Views

The "%MLSM-6-MMLS_MODE_CHANGE: MMLS:" error message appears in Catalyst 6500 series switches running... - ( ‎06-22-2009 04:13 PM )

by on

0 Replies 1710 Views

0 Replies

1710 Views