cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

203
Views
5
Helpful
1
Replies
Highlighted

11213 No response received from Network Access Device after sending a Dynamic Authorization request

Hi there,

 

I see this error a lot in my ISE dashboard

11213 No response received from Network Access Device after sending a Dynamic Authorization request

At the same time I see the Posture Status as "Compliant"

What could be causing this? Have anyone encountered this before

 

Thanks,

Hari

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 11213 No response received from Network Access Device after sending a Dynamic Authorization request

It seems the CoA response packet from the NAD to ISE PSN lost or something like that, but the NAD went ahead and performed a re-auth to put the endpoint in compliant state.

I would suggest you to monitor the connectivity between ISE PSN and the NADs.

1 REPLY 1
Cisco Employee

Re: 11213 No response received from Network Access Device after sending a Dynamic Authorization request

It seems the CoA response packet from the NAD to ISE PSN lost or something like that, but the NAD went ahead and performed a re-auth to put the endpoint in compliant state.

I would suggest you to monitor the connectivity between ISE PSN and the NADs.