cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

161
Views
1
Helpful
4
Replies
Cisco Employee

Anyconnect update (CPP) report

hi,

We have a setup with multiple client provisioning rules to apply separate Anyconnect configurations (one with VPN, another with VPN_disable).

Even though the update seems to go well, we cannot find any traces of it in the client provisioning reports. (returns empty)

How can we check which client provisioning rule was hit in the reports?

Regards

Gert

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Anyconnect update (CPP) report

The client provisioning report should have entries to indicate the matched rule(s) when an endpoint browser redirected to or accessing directly one of the client provisioning portals. It does not record the events from AnyConnect, however.

Screen Shot 2017-06-07 at 3.12.51 PM.png

4 REPLIES 4
Cisco Employee

Re: Anyconnect update (CPP) report

I have asked SME imran.bashir1 to comment as well

Cisco Employee

Re: Anyconnect update (CPP) report

The client provisioning report should have entries to indicate the matched rule(s) when an endpoint browser redirected to or accessing directly one of the client provisioning portals. It does not record the events from AnyConnect, however.

Screen Shot 2017-06-07 at 3.12.51 PM.png

Highlighted
Cisco Employee

Re: Anyconnect update (CPP) report

Ok, but how can we track/monitor Anyconnect clients hitting the CPP rules?

Is there any other report that shows this?

Cisco Employee

Re: Anyconnect update (CPP) report

There is no report to show AnyConnect hits on the CP policy rules, at present.