cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

259
Views
0
Helpful
2
Replies
Highlighted
Cisco Employee

Are there any guides on using ISE 2.x for RADIUS device administration?

Are there any guides on how to configure ISE 2.x to use RADIUS for device administration? Is there a way, or reason, to send RADIUS packets to the Device Admin Policy Sets?

Thanks

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Are there any guides on using ISE 2.x for RADIUS device administration?

don't think you can send radius to the device admin policy sets

Also there is no guide that I know of published by the ise team

check out this thread

https://communities.cisco.com/message/243303

copying SME kthiruve as well

2 REPLIES 2
Cisco Employee

Re: Are there any guides on using ISE 2.x for RADIUS device administration?

don't think you can send radius to the device admin policy sets

Also there is no guide that I know of published by the ise team

check out this thread

https://communities.cisco.com/message/243303

copying SME kthiruve as well

Cisco Employee

Re: Are there any guides on using ISE 2.x for RADIUS device administration?

ISE Device Admin Policy Sets are for T+ only. If using RADIUS, then use the regular policy sets, which are for RADIUS. Device admins depend largely on the NAD implementations so please refer to the specific NAD platform documentations.