cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1094
Views
1
Helpful
2
Replies

Avaya switches support

rotau
Cisco Employee
Cisco Employee

Hi,

I have an opportunity at customer that all of his access switches are Avaya 3548 POE based.

According to the compatibility matrix, only AAA is supported, limited profiling and no posturing at all.

I need to understand what are the limitations for an ISE deployment on that given network.

Please help!

Many Thanks!

Roni Tau

rotau@cisco.com

1 Accepted Solution

Accepted Solutions

hslai
Cisco Employee
Cisco Employee

Mainly the lack of device sensor support. If not done already, please review How To: ISE Profiling Design Guide

View solution in original post

2 Replies 2

hslai
Cisco Employee
Cisco Employee

Mainly the lack of device sensor support. If not done already, please review How To: ISE Profiling Design Guide

To add to Hsing's response, we have not performed full feature testing with this specific Avaya switch model, but ISE provides a compliment of 3rd-party features to allow integration with 3rd-party NADs.  A typical requirement is support for SNMP or RADIUS-based CoA to handle flows that rely on change of authorization (CWA, Posture, MDM, Guest, BYOD, etc.)

Craig

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: