cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

548
Views
0
Helpful
1
Replies
Beginner

Cisco ISE 2.4 BYOD integration with Meraki

I am interested in configuring Cisco ISE 2.4 BYOD and integrating it with my Meraki MX84, MS320 and MS225 switches and my MR42 Access Point (AP).

 

I would ideally like to set up a Dual SSID scenario with an isolated "Guest" network (going through the ISE 2.4 on-boarding process) and then automatically connect to the "Authorised" network when permitted by the ISE policies.

 

I am hoping to use the DHCP and wireless features on the Meraki appliances and enable a Guest redirect to ISE 2.4 .

 

I have read there is some limitations with integrating ISE to Meraki, and I was hoping to get some more information on if my scenario would be technically possible?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco ISE 2.4 BYOD integration with Meraki

Did you follow the meraki ise how to guide on our design integration guide site?


https://community.cisco.com/t5/security-documents/ise-design-amp-integration-guides/ta-p/3621164
1 REPLY 1
Cisco Employee

Re: Cisco ISE 2.4 BYOD integration with Meraki

Did you follow the meraki ise how to guide on our design integration guide site?


https://community.cisco.com/t5/security-documents/ise-design-amp-integration-guides/ta-p/3621164