cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

853
Views
0
Helpful
2
Replies
Highlighted
Cisco Employee

Cisco ISE and Support for Ubiquiti UniFi SHD (UAP)

I have question around anyones experience of what is supported from the ISE standpoint if utilizing Ubiquiti UniFi SHD (UAP) access points.  From the searching I have done it appears that the system does support Radius authenitcation, but not sure if anyone can speak to their experience on this matter.  Assuming it is basic Radius, then just Access-Accept or Reject will be supported, but looking to see if someone has a few more details that might assist in understanding what might or might not work.

 

Let me know if you have any further clarifying questions.

 

-Gary

Everyone's tags (6)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Cisco ISE and Support for Ubiquiti UniFi SHD (UAP)

I don't have experience with Ubiquiti AP, but looks like basic 802.1X is supported:

https://blog.ubnt.com/2016/11/04/managing-radius-authentication-unifi/

MAC filtering seems to be supported, but cannot be combined with guest access according to this posting:

https://community.ubnt.com/t5/UniFi-Wireless/Mac-Filtering-and-Guest-Policy/td-p/1932393

Guest access supports external portal but have not tested it with ISE:

https://help.ubnt.com/hc/en-us/articles/115000166827

Cisco Employee

Re: Cisco ISE and Support for Ubiquiti UniFi SHD (UAP)

If all else fails remember you can use the auth vlan dhcp dns feature of ise as well


https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01000.html
2 REPLIES 2
Cisco Employee

Re: Cisco ISE and Support for Ubiquiti UniFi SHD (UAP)

I don't have experience with Ubiquiti AP, but looks like basic 802.1X is supported:

https://blog.ubnt.com/2016/11/04/managing-radius-authentication-unifi/

MAC filtering seems to be supported, but cannot be combined with guest access according to this posting:

https://community.ubnt.com/t5/UniFi-Wireless/Mac-Filtering-and-Guest-Policy/td-p/1932393

Guest access supports external portal but have not tested it with ISE:

https://help.ubnt.com/hc/en-us/articles/115000166827

Cisco Employee

Re: Cisco ISE and Support for Ubiquiti UniFi SHD (UAP)

If all else fails remember you can use the auth vlan dhcp dns feature of ise as well


https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01000.html