cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

88
Views
10
Helpful
4
Replies
Beginner

Cisco ISE Load on SNS-3615

Hello team, I purchased two Cisco SNS-3615 for my end customer and in the BOM I have this option "SW-36X5-ISE-K9(Cisco ISE Software Load on SNS-36x5-K9 appliance) and want to confirm if the software is already loaded on the appliance or I have to download on software website for deployment?

 

Please waiting for your feedback.

 

 

Best Regards.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
VIP Advocate

Re: Cisco ISE Load on SNS-3615

The 3615 will ship with ISE 2.6 installed and ready for setup. When it arrives you will have to access it via keyboard/monitor unless the CIMC gets a DHCP address.

Once you have access to the CIMC you can use the HTML KVM to run through the ISE setup script.
Cisco Employee

Re: Cisco ISE Load on SNS-3615

4 REPLIES 4
Highlighted
VIP Advocate

Re: Cisco ISE Load on SNS-3615

The 3615 will ship with ISE 2.6 installed and ready for setup. When it arrives you will have to access it via keyboard/monitor unless the CIMC gets a DHCP address.

Once you have access to the CIMC you can use the HTML KVM to run through the ISE setup script.
Cisco Employee

Re: Cisco ISE Load on SNS-3615

Beginner

Re: Cisco ISE Load on SNS-3615

Thanks Jason, very helpfull 

Beginner

Re: Cisco ISE Load on SNS-3615

Thanks Damien for your quick feedback.