05-28-2019 07:55 AM
On ISE 2.4 I see Tacacs authentication failure for 2 devices. This is under –-> work centers -->device administration -->reports --> Device administration report --->Top N Authentication by failure reason. The failure has to do with the username, where can I check the username to make sure this device does have the correct username.
TACACS Authentication |
Failure Reason: 13030 TACACS+ authentication request missing a User name
|
Solved! Go to Solution.
05-28-2019 03:21 PM
Hello,
please collect tcp dump from operations diagnostic tools.
then try to do this authentication, once you are done stop and download the pcap.
open using wireshark, the payload will be encrypted so you need to inside wireshark to preferences> protocols and search for tacacs+
put the shared secret there and then you will be able to check the packets and verify what is missing,
Wishes,
05-28-2019 03:21 PM
Hello,
please collect tcp dump from operations diagnostic tools.
then try to do this authentication, once you are done stop and download the pcap.
open using wireshark, the payload will be encrypted so you need to inside wireshark to preferences> protocols and search for tacacs+
put the shared secret there and then you will be able to check the packets and verify what is missing,
Wishes,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide