cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

238
Views
1
Helpful
1
Replies
Cisco Employee

Does ISE support the SNAT environment using SLBs(Server load balancers)?

Hi All,

My customer asked me weather SNAT using SLB(The customer plans to use F5) support for ISE?

They can NOT use CoA(My understand CoA does NOT support SNAT).

The customer assumes only the function of general RADIUS authentication.

If someone has any information/documents about this, please let me know.

Thanks,

-Hidehiko

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Advocate

Re: Does ISE support the SNAT environment using SLBs(Server load balancers)?

Review the ISE-F5 LB Guide and also content from BRKSEC-3699 (reference version) @ ciscolive.com.

     SNAT for NAD is BAD.  SNAT for COA is OK.

View solution in original post

1 REPLY 1
Advocate

Re: Does ISE support the SNAT environment using SLBs(Server load balancers)?

Review the ISE-F5 LB Guide and also content from BRKSEC-3699 (reference version) @ ciscolive.com.

     SNAT for NAD is BAD.  SNAT for COA is OK.

View solution in original post