getting error on ISE "ise-2.7.0.356.SPA.x86_64" like below | Setting the timezone via CLI is not supported.

[Ibrahim Jamil]

Hi Freinds

Hope ur safe from CODVID-19 and you are sitting on ur HomeDesk with My Lovely Anyconnect :)

getting error on ISE "ise-2.7.0.356.SPA.x86_64" like below

Enter configuration commands, one per line. End with CNTL/Z.
HQ-ISE-01/admin(config)# clock timezone America/Los_Angeles
Setting the timezone via CLI is not supported.
HQ-ISE-01/admin(config)#

I tried from GUI getting it UTC but its grayed out , aka cant changed

kindly help and Advise

thanks

[Cristian Matei]

Hi,

   You can escape CODVID-19, but you can't escape bugs :) See if this applies, maybe it came back in 2.7

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvo49755/?rfs=iqvred

Apply the latest available patch and see how it goes.

Regards,

Cristian Matei.