cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

330
Views
0
Helpful
3
Replies
Cisco Employee

How to create virtual network in authorization profile when security group is checked

Hi,

 

Inside authorization profile in the common tasks area with Security Group checked, then selecting a security group tag, a field for 'Virtual Network' appears. Where do we create this virtual network from?

 

Thanks,

Jennifer

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Engager

Re: How to create virtual network in authorization profile when security group is checked

I am pretty sure that is all part of SDA/DNA-C/ISE integration, but I could be wrong on that.

 

https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Campus/CVD-Software-Defined-Access-Design-Guide-2018APR.pdf

 

 

3 REPLIES 3
VIP Engager

Re: How to create virtual network in authorization profile when security group is checked

I am pretty sure that is all part of SDA/DNA-C/ISE integration, but I could be wrong on that.

 

https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Campus/CVD-Software-Defined-Access-Design-Guide-2018APR.pdf

 

 

Beginner

Re: How to create virtual network in authorization profile when security group is checked

Hi,

 

Did you get a resolution to this. I have this same issue and cannot specify a VN in my auth profile.

 

regards

 

Ian

 

Highlighted
Cisco Employee

Re: How to create virtual network in authorization profile when security group is checked

As paul said, this depends on DNA-C. I believe it supported in SD-Access in DNA-C 1.2.5+.

During Provisioning the fabric, we add VN with a IP pool and there we may select a Scalable Group (under Groups) with the VLAN (under Auth Policy).