cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

127
Views
0
Helpful
2
Replies
Beginner

Hybrid-Distributed - 3 Nodes

Hi

 

I'm thinking a ise deployment and I want use a "2-node deployment (redundant)" with a "node A" and "node B", and use a "node C" as standalone node for syslog or loggin. 

 

Can use this deployment? 

 

Regards.

 

 

fixie rider
2 REPLIES 2
VIP Advocate

Re: Hybrid-Distributed - 3 Nodes

A three node deployment will work, but it's not a supported or tested deployment model.  

 

Syslogs from PSN's are collected by the two monitoring nodes the deployment should have.  Run everything on just two nodes if you fit within the scaling parameters.  

Cisco Employee

Re: Hybrid-Distributed - 3 Nodes

its rather confusing what you're trying to do. an ise deployment consists of personas. any deployment must have at least 1 admin, 1 monitoring and 1 policy services. they can be installed on one node as a standalone. For redundancy you have another node that can run all 3, with secondary admin/mnt. Why would you need another node? you can only have 2 admin and 2 mnt in a deployment

youtube
https://www.youtube.com/user/CiscoISE

http://cs.co/ise-training

Perf and scale
https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148

Please look at deployment models in admin guide as a start.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_011.html#ID15