cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

214
Views
0
Helpful
2
Replies
Highlighted
Cisco Employee

ISE 2.1 supported on NFS based SAN

In the install guide we stipulate that the host must support shared VMFS volumes on a SAN.

Would this be supported if the ESX hosts presented this VMFS off of a NFS base IP SAN assuming that the IO requirements where met or is it mandatory to run VMFS on block based SAN storage?

Many thanks

Alistair

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ISE 2.1 supported on NFS based SAN

Alistair,

To my knowledge, our QA teams have not tested NFS for storage.  That said, I don't see a technical reason why it wouldn't work so long as the IO requirements were met.

Regards,

-Tim

2 REPLIES 2
Cisco Employee

Re: ISE 2.1 supported on NFS based SAN

Alistair,

To my knowledge, our QA teams have not tested NFS for storage.  That said, I don't see a technical reason why it wouldn't work so long as the IO requirements were met.

Regards,

-Tim

Cisco Employee

Re: ISE 2.1 supported on NFS based SAN

Thanks Tim,

That was my gut feel as well.

Regards

Al