cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

122
Views
0
Helpful
1
Replies
Highlighted
Cisco Employee

ISE 2.1 to ISE 2.6

I'm heading to a customer the week of July 22nd to help with a new ISE install.  That being said, they have an old ISE install (2.1) that didn't go well and was meant to be a migration from ACS.  The clustering never took ahold correctly in their 2.1 install (I wasn't on the account at the time) and there are several other small nagging issues that have lead them to purchase new appliances and move to 2.6.  With that in mind - this is for device management authentication only (for now) and the configuration for that purpose is good.  How would the community recommend we get the necessary configuration (devices/groups/etc) from the 2.1 install into the NEW 2.6 install?

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ISE 2.1 to ISE 2.6

If only copying network devices, network device groups, internal users, and internal groups, then we may use CSV export these items from ISE 2.1, adjust the columns, and then import them to ISE 2.6. Otherwise, we may take a configuration backup from ISE 2.1 and restore it to ISE 2.6.

From ISE 2.1 to 2.6, we will get the new policy UI so please take a look at the UI walkthrough at 

What's New in ISE 2.3? - Cisco Community

1 REPLY 1
Cisco Employee

Re: ISE 2.1 to ISE 2.6

If only copying network devices, network device groups, internal users, and internal groups, then we may use CSV export these items from ISE 2.1, adjust the columns, and then import them to ISE 2.6. Otherwise, we may take a configuration backup from ISE 2.1 and restore it to ISE 2.6.

From ISE 2.1 to 2.6, we will get the new policy UI so please take a look at the UI walkthrough at 

What's New in ISE 2.3? - Cisco Community