cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

706
Views
3
Helpful
2
Replies
Highlighted
Cisco Employee

ISE 2.4 DNA-C Integration

According to the ISE 2.4 Admin Guide (pg 62), there is a note in the details of the ISE and DNA-C integration highlights I've copied below:

"Note: For the integration to work, you must manually assign the pxGrid persona to the Primary PAN node as well as the Secondary PAN node (if used) in the Administration > System > Deployment page of the Cisco ISE WebUI Admin console."

Is this accurate, DNA-C integrations require pxGrid persona to only exist on the Primary and Secondary Admin nodes of an ISE deployment? pxGrid cannot exist on their own independent persona, as is supported with other ecosystem integrations with distributed ISE environments?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ISE 2.4 DNA-C Integration

>>For the integration to work, you must manually assign the pxGrid persona to the Primary PAN node as well as the Secondary PAN node (if used) in the Administration > System > Deployment page of the Cisco ISE WebUI Admin console.

This is not true at all. The pxgrid persona can be on any of the nodes in ISE distributed deployment. DNAC-1.1 and above can detect the pxgrid nodes in the deployment and connect to it automatically.

2 REPLIES 2
Cisco Employee

Re: ISE 2.4 DNA-C Integration

This seems true earlier and might not be required any longer. We will confirm and update.

Cisco Employee

Re: ISE 2.4 DNA-C Integration

>>For the integration to work, you must manually assign the pxGrid persona to the Primary PAN node as well as the Secondary PAN node (if used) in the Administration > System > Deployment page of the Cisco ISE WebUI Admin console.

This is not true at all. The pxgrid persona can be on any of the nodes in ISE distributed deployment. DNAC-1.1 and above can detect the pxgrid nodes in the deployment and connect to it automatically.