cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

144
Views
0
Helpful
5
Replies
Beginner

ISE auto power up

IS there any way to make ISE and CPI turned on automatically after power cut ?!

 
 
Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advocate

Re: ISE auto power up

@Ahmed ElShanab  - do you mean virtual instance of ISE and CPI, or on the hardware appliances?

 

If it's a Cisco UCS hardware appliance, then you can configure the behaviour of the appliance after a power cut

 

ucs-power.PNG

View solution in original post

Everyone's tags (2)
5 REPLIES 5
VIP Advisor

Re: ISE auto power up

Yes, you can do this from ESXi configuration using VM shutdown/startup
configuration
Beginner

Re: ISE auto power up

I have ISE Appliance Not VM

Highlighted
VIP Advocate

Re: ISE auto power up

@Ahmed ElShanab  - do you mean virtual instance of ISE and CPI, or on the hardware appliances?

 

If it's a Cisco UCS hardware appliance, then you can configure the behaviour of the appliance after a power cut

 

ucs-power.PNG

View solution in original post

Everyone's tags (2)
Beginner

Re: ISE auto power up

@Arne Bier Have Hardware Appliances,

VIP Advocate

Re: ISE auto power up

Then the commands listed in the CIMC will help you. It’s also in the GUI. But I find the CLI illustrates it more clearly. 

Let us know if this sorts it ;-)