cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

202
Views
0
Helpful
3
Replies
Cisco Employee

ISE compatibility with 3com/H3C switches

Hello team,

 

Does ISE support wired access control, automatic dacl/vlan config, authentication, etc with 3rd party switches, mainly 3com 5500 G and H3C 5500??

 

How do you suggest to do that?

 

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: ISE compatibility with 3com/H3C switches

Hi

This is something you need to try when it comes to 3rd party vendor.
You have these links:
- https://community.cisco.com/t5/security-documents/ise-third-party-nad-profiles-and-configs/ta-p/3648719

- https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/compatibility/b_ise_sdt_24.html#thirdpartyaccessswitches

The way to implement things will depend on what you can on your switches. It would be good to talk with their tac in addition to testing you'll do.

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

View solution in original post

3 REPLIES 3
VIP Advisor

Re: ISE compatibility with 3com/H3C switches

Hi

This is something you need to try when it comes to 3rd party vendor.
You have these links:
- https://community.cisco.com/t5/security-documents/ise-third-party-nad-profiles-and-configs/ta-p/3648719

- https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/compatibility/b_ise_sdt_24.html#thirdpartyaccessswitches

The way to implement things will depend on what you can on your switches. It would be good to talk with their tac in addition to testing you'll do.

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

View solution in original post

Beginner

Re: ISE compatibility with 3com/H3C switches

Hi,

 

https://community.cisco.com/t5/identity-services-engine-ise/ise-2-4-patch-4-amp-hp-h3c-comware-5-basic-dot1x/m-p/3761950

 

I got some troubles to make basic DOT1X with H3C 5500, I advice you to run tests in lab / poc / ...

Cheers

Cisco Employee

Re: ISE compatibility with 3com/H3C switches