cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

115
Views
0
Helpful
1
Replies
Highlighted
Cisco Employee

ISE Posture - Static IP

Hi,

 

Any idea to check an endpoint that is using static IP instead of DHCP using ISE posture/compliance check?

 

Thanks

Wing Churn

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ISE Posture - Static IP

I do not think it doable today via an ISE posture check.

Although DHCP options can be checked in Windows Registry "HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces" key but different systems have different set of subkeys. Perhaps, consider to check such via Netsh or PowerShell in a startup script. 

NETSH Command to Change from Static IP Address to DHCP « Memorise and Replace netsh with Windows PowerShell - Basic network cmdlets - Thomas Maurer might interest you.

 

1 REPLY 1
Cisco Employee

Re: ISE Posture - Static IP

I do not think it doable today via an ISE posture check.

Although DHCP options can be checked in Windows Registry "HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces" key but different systems have different set of subkeys. Perhaps, consider to check such via Netsh or PowerShell in a startup script. 

NETSH Command to Change from Static IP Address to DHCP « Memorise and Replace netsh with Windows PowerShell - Basic network cmdlets - Thomas Maurer might interest you.