cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

78
Views
0
Helpful
1
Replies
Beginner

ISE SCCM check always show as passed

Hi, 

We have a posture rule  to check installed critical patches at SCCM system.

I have set SCCM check based on ISA admin guide and based on this guide

https://community.cisco.com/t5/security-documents/how-to-integrate-cisco-ise-with-microsoft-sccm-for-patch/ta-p/3725035

 

The computer shows there is a missing critical patch, and shows the small icon notification also (the are misising patches), but the posture riport shows as passed all the time.

What's wrong with it? The anyconnect is the latest 4.7.02036, the compliance module is 4.3.512.6144

The sccm is ver 5.0.

 

Any suggestion?

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ISE SCCM check always show as passed

If not already done, please use Cisco Diagnostic and Reporting Tool (DART) to generate a support bundle and submit it to Cisco TAC to troubleshoot. 

1 REPLY 1
Cisco Employee

Re: ISE SCCM check always show as passed

If not already done, please use Cisco Diagnostic and Reporting Tool (DART) to generate a support bundle and submit it to Cisco TAC to troubleshoot.